Skid Mounted Cooling Tower
»This entire setup can taken any where and it will ready to use by just connecting it to your system. Skid mounted cooling tower is customizable according to the user requirements.
»kid Mounted Cooling Tower a complete set of cooling materials. Such as Cooling Tower, Pump, Pipe work with connections, Water Treatment system, Electrical system mounted on a single base frame.
»steel melting plants, chemical plants
» Skid mounted cooling tower is customizable according to the user requirements.
Closed Circuit Cooling Tower0 out of 5
»Closed Circuit Cooling Tower are suitable for Thermal Power Plants. Closed Circuit cooling tower certain processes needs a closed loop, that’s why the process water for cooling does not come in make contact with the full of atmosphere air. Closed loop type cooling is minimizes process fouling.
»Our Closed Circuit Cooling System gives completely rated thermal presentation, which also by yourself verified over special types of flow and high temperature requirements. Closed Circuit Cooling Towers are high effciency and water saving.
»Water Temparature Capacity: Closed Circuit Cooling Towers are accomplished of incoming fluid temperatures as high as 180ºF (82.2ºC),
»A closed loop system secures the nature of the procedure liquid, diminishes framework upkeep, and gives operational adaptability at a somewhat higher starting expense.
»When choosing which framework is best for an application, a few elements ought to be considered..
Round Shape Cooling Tower0 out of 5
»The fan specifically coupled to the engine, amid tasks takes away the warmth by incited draft instrument. Air is drawn from the lower air in take territory and is initiated to movement through the fill media in this manner taking ceaselessly the idle warmth from the water going through the fill media. Bit of water dissipated, expels the warmth from the rest of the water. The warm wet air is drawn through the fan deck is released to the environment. Chilly water, gathered at the accumulation sump, is re-flowed to the source.
»The distinctive highlights of our item are reduced outline Honey brush compose PVC fills, with changing woodwind sizes, to give most extreme contact surface region and warmth exchange surface per unit volume.
»Diesel / Gas Gensets & Megawatt Projects
»Glass Mfg. Plant
» A high efficient nylon rotating sprinkler head system and aluminium alloy sprinkler system is incorporated. Both sprinkler systems are self -rotating at low head loss.
Mist Eliminator0 out of 5
Mist Eliminators are designed to remove contaminants from process air emissions that evolve as mist droplets. These contaminants can include oil mist, machine coolant mist, chromic acid mist, sulfuric acid mist, and other entrained mist. KCH Mist Eliminators are among the most efficient on the market and meet or exceed state and federal standards. Mist Eliminators work by utilizing composite mesh or vane plate surfaces to separate the mist droplets from gas streams through mechanical impingement and inertial impaction. The large surface area coupled with a small volume allows for the collection of liquid without substantially impeding the flow of gas. Some Composite Mesh Pad Mist Eliminators can also be used as a post-control acid fog eliminator on Wet Scrubbers.
Heat Transfer Equipments has extensive experience and application knowledge in gas-liquid separations, liquid-liquid separations, and vapor flow conditioning devices.
We offer you the opportunity to:
- Improve product purity
- Reduce the loss of valuable chemicals and products
- Increase plant throughput capacity
- Prevent plant air and water pollution
- Reduce plant effluent treatment cost
- Protect valuable downstream process equipment
Uses of mist eliminators
The formation of mists in gas streams often results in process inefficiencies and/or product loss in equipment such as knockout drums, distillation columns, evaporators, and environmental scrubbers. Mists can also cause serious damage to downstream equipment.
The following examples can help you evaluate the benefits that a properly designed mist eliminator can provide to your operations.
Reduce loss of valuable chemicals
Mist eliminators markedly cut glycol, amine, or solvent consumption in absorption and regeneration towers.
Increase throughput capacity
Mist eliminators allow significant increase in throughput anywhere gases and liquids come into contact in process equipment.
Improve product purity
Mist eliminators prevent contamination of side draws and overheads in refinery atmospheric and vacuum towers and other distillation columns.
Mist eliminators prevent the poisoning of expensive downstream catalysts or provide boiler feed water quality condensate from evaporator overheads.
Provide equipment protection
Mist eliminators protect turbine, blower and compressor blades, which eliminates serious maintenance problems.
Prevent air pollution
Mist eliminators help reduce droplet emissions to environmentally acceptable levels.
Timber Cooling Tower0 out of 5
»Wooden Single Flow and Double Flow induced Draft Cross Flow Direct Drive System. Reduction Gear Box Drive Suystem. Counter Flow Square / Rectangular Induced / Forced Draft Towers. Packaged Wooden Double / Single Flow Induced Draft Cross Flow. Fan-less Induced Draft Wooded Cooling Tower Atmospheric (Natural Draft Cooling Tower). Re-Inforced Concrete Cooling Towers. Spares For any Type and Make of Cooling Systems.
»Temperature 4°C To 30°C 2 Cell Timber Cooling Tower 3 Cell Timber Cooling Tower 5 TR T0 1000 TR Uniform water spraying Fow Rate from 5 M3/Hr To 500 M3/Hr
»Design Water Flow Rate – M3 /hr Hot Water Inlet Temperature – 0 C Cold Water Outlet Temperature – 0 C Wet Bulb Temperature at site – 0 C
»Automobile Industries, Cable Industries, Casting Units, Cement factory, Chemical Industires, Dairy Industries, Fertilizers Indusries, Food Industries, Hotels , Hospitals, Paper Industries, Power Generation Stations, Petrochemical Industries, Pharmaceutical units, Plastic Industries, Refineries, Rubber Industries, Steel Plant & Rolling Plant, Sugar Mills, Textile Mills, Spinning Mills, Tyre Manufacturing units Water effluent treatment industries
»Economy In Operation Best Performance Architectural Compatability Maintenance Free
Hybrid Cooling Tower0 out of 5
»Quantitatively, the material adjust around a half and half cooling pinnacle is administered by the operational factors of make-up volumetric stream rate, vanishing and windage misfortunes, draw-off rate, and the focus cycles.
»The water pumped from the pinnacle bowl is the cooling water directed through the procedure coolers and condensers in a modern office. The cool water ingests warm from the hot procedure streams which should be cooled or dense, and the retained warmth warms the coursing water. The warm water comes back to the highest point of the cooling tower and streams descending over the fill material inside the pinnacle. As it streams down, it contacts surrounding air ascending through the pinnacle either by characteristic draft or by constrained draft utilizing huge fans in the pinnacle. That contact makes a little measure of the water be lost as windage/float and a portion of the water to dissipate. The warmth required to dissipate the water is gotten from the water itself, which cools the water back to the first bowl water temperature and the water is then prepared to recycle. The vanished water abandons its broke down salts in the majority of the water which has not been dissipated, in this manner bringing the salt focus up in the flowing cooling water. To keep the salt grouping of the water from winding up too high, a bit of the water is drawn off/blown down for transfer. New water make-up is provided to the pinnacle bowl to make up for the loss of vanished water, the windage misfortune water and the draw-off water.
»steel melting plants, chemical plants
» Fresh water make-up is supplied to the tower basin to compensate for the loss of evaporated water, the windage loss water and the draw-off water.